Wet Process Heating and Cooling Equipment

XC Series, In-line Heat Exchangers

The XC Series in-line fluoropolymer heat exchanger is designed for the most demanding chemical heating or cooling applications. Typical industries served include semiconductor, FPD, MEMS, and biomedical.

SPECIFICATIONS:

Service: In-line chemical heat exchanger with all fluoropolymer wetted surfaces (tubing side) for virtually any wet chemistry application.

Sizes:

1.5 ft2 (.14m2) of exchange area

2.5 ft2 (.23m2) of exchange area

3.5 ft2 (.33m2) of exchange area

Standard Features:

½-inch (12mm) heavy wall PFA tubing, .030" (.76mm) thick

All welded construction (shell)

4½-inch (114mm) diameter polypropylene shell

Internally baffled for enhanced heat exchanger performance

"U" factor (depending on flow rate): 25-50 BTU/(hr x ft2 x °F) = 142-284 J/(s x m2 x °C)

Shell-side drain connection

Fluid Connections:

Fluid (tube): ½-inch (12mm) male flare PFA

Shell: ¾-inch (19mm) male flare PFA

Shell drain: ¼-inch (6mm) male flare PFA

Maximum Pressure/Temperature:

Tube (PFA): 35 PSIG (241 kPa) at 120ºC (250ºF)

Shell (PP): 30 PSIG (207 kPa) at 82ºC (180ºF)

Optional shell (PVDF): 30 PSIG (206 kPa) at 135ºC (275ºF)

Warranty: One year
Options:

¼-inch (6.4mm) to ¾-inch (19mm) Super Pillar 300 Type® connections

Custom sizes based on application

PVDF shell

FEATURES AND BENEFITS:

Exceptionally clean performance: Cleanroom assembled and tested to ensure the highest manufacturing standards.

Leak free operation: Integral inlet/outlet for single point fluid connections simplifies installation and greatly reduces the potential for chemical leaks.

Outstanding performance: Heavy wall, large diameter tubing improves circulation and minimizes pressure drop.

Compact size: Less surface area required for same BTU exchange compared to most other fluoropolymer exchangers.

Rugged construction: Thick wall, welded construction provides extremely long service life.

Outstanding chemical compatibility: All tube-side parts are fluoropolymer and compatible with most chemistries for virtually unlimited process options. Shell is available in polypropylene (standard) or PVDF construction.

Note: Vacuum breakers are recommended for steam heating applications. Please consult factory for reduced pressure steam applications. Pulsation dampeners recommended.

DOWNLOAD THE INFORMATION SHEET

For more information on this, or any other Process Technology product, please contact our offices (toll free within the United States or Canada) for the distributor nearest you, or visit our contact page.

U.S./Canada: 800-621-1998
Worldwide: 440-974-1300

Wet Process Heating and Cooling Equipment

XC Series, In-line Heat Exchangers

U.S./Canada: 800-621-1998 Worldwide: 440-974-1300

U.S./Canada: 800-621-1998
Worldwide: 440-974-1300