 |
Wet Process Heating and Cooling Equipment |
|
||
| MODEL NUMBER | VOLTS (See Thermal Overload Protection) |
MAX. AMPS | REPL. RELAY P/N | REPL. RELAY P/N (LESS TRANS.) |
REPL. TRANS. P/N | REPL. SENSORS | SHIP WGT. Lbs./(kg) |
|---|---|---|---|---|---|---|---|
| DSL302 | 240 | 30 | AH30-1 | AH30-2 | HD50 2/1 | RTD1000 | 16 (7.5) |
| DSL304 | 480 | 30 | AH30-1 | HD50 4/1 | RTD1000 | 16 (7.5) | |
| DSL502 | 240 | 50 | AH50-1 | AH50-2 | HD50 2/1 | RTD1000 | 17 (8) |
| DSL504 | 480 | 50 | AH50-1 | HD50 4/1 | RTD1000 | 17 (8) | |
| DSL752 | 240 | 75 | AH75-1 | AH75-2 | HD100 2/1 | RTD1000 | 23 (10.5) |
| DSL754 | 480 | 75 | AH75-1 | HD100 4/1 | RTD1000 | 23 (10.5) | |
| DSL902 | 240 | 90 | AH90-1 | AH90-2 | HD100 2/1 | RTD1000 | 25 (11.5) |
| DSL904 | 480 | 90 | AH90-1 | HD100 4/1 | RTD1000 | 25 (11.5) | |
| DSL1202 | 240 | 120 | AH120-1 | AH120-2 | HD100 2/1 | RTD1000 | 27 (12.5) |
| DSL1204 | 480 | 120 | AH120-1 | HD100 4/1 | RTD1000 | 27 (12.5) | |
| DSL1502 | 240 | 150 | AH150-1 | AH150-2 | HD150 2/1 | RTD1000 | 33 (15) |
| DSL1504 | 480 | 150 | AH150-1 | HD150 4/1 | RTD1000 | 33 (15) | |
| Combination
control consists of gasketed plastic enclosure, thermostat, contactor and optional control
transformer. To omit step-down transformer, add "LT" to end of model number. ** Thermal Protection Systems |
|||||||
Product Features and Benefits:
IMPROVES PROCESS CONTROL: Easy to read dual LED displays (.3 inches high). Two set points (heating and cooling). Provides precise control for consistent plating and etch rates in most aqueous processes.
TEMPERATURE SENSOR: Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.
CORROSION RESISTANT ENCLOSURE: NEMA 1, IP23, gasketed plastic enclosure with sealed tactile switches and stainless steel hardware.
CERTIFICATIONS: cUL.
CAPACITIES:
• Large switching capacities from 30 to 150 amps for either 240 or 480 volts (other voltages available). • Single pole single-throw switch rated at 3 amps for cooling loads. • Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C). • +/- .25% full span, single digit accuracy. • 20°F (-7°C) to 130°F (54°C) ambient temperature range. • 120, 208, 380, 415, 600 and other voltages available. • Single or three phase. • Control transformer required above 240 volts and recommended for 208 and 240 volt service.
SPECIAL FEATURES: Auto tune PID, PID or On/Off control with Auto/Manual operation.
SAFETY FEATURES:
• Pre-wired P1 terminal blocks. • Non-volatile memory. • Programmable high alarm shutdown. • Sensor short and break protection. • Programmable high setpoint limit. • Security code restricted menu. OPTIONS AVAILABLE (consult factory):
• 25-foot (7.6m) and 50-foot (15.2m) sensors. • Pre-wired outlets for plug-in heaters (some sizes). • Ground fault protection (GFP) circuitry. • P2 or P3 thermal protection systems. • Integral liquid level control components. • Front panel mounted digital timers. • Three wire 100-ohm RTD sensors. • Type J, K, T, and R thermocouples. • Special sensors. Required for temperatures above 500°F (260°C). • Scalable voltage and current inputs. • 4-20 mA or 0-10VDC outputs for process recording. • 4-20 mA or 15VDC control outputs. • Voltage, relay, logic/SSR and current outputs. • RS232 or RS485 communication protocol. • CE compliance. • Outdoor enclosures. DOWNLOAD THE INFORMATION SHEET (including dimensional diagram)
[ Home | Search
our Site | Industrial Products | Aquaculture
Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF
Files | Contact Us ]
Copyright © 2012
Process Technology
info@process-technology.com