Wet Process Heating and Cooling Equipment

Heat Exchangers

METAL HEAT EXCHANGERS

.75 square feet to 89.8 square feet exchange area.

Low profile shapes and configurations available to meet your application. Available for heating and cooling applications.

Every square inch of coil surface is an active exchange area.

For plating tanks and other aqueous solutions. Check recommendation chart or with chemical supplier for proper sheath material selections.

Can be used with steam/water pressures up to 100 p.s.i.

Features:

Available in 20 gauge steel, 316 stainless steel, titanium, Hastelloy C^Ò and zirconium. Heavier gauge tubing and pipe available.

Available in horizontal or vertical configurations.

Optional hangers available.

Special length and "L" shaped configurations available for bottom exchange applications.

1 inch MNPT connections standard. Other sizes available and recommended for large coils. Consult factory. Inlets and outlets must be sized to adequately handle water or steam volume requirements.

Optional fluoropolymer covering available at solution interface for corrosion protection (consult factory).

Other riser tube lengths and configurations available.

Specific product information

FLUOROPOLYMER HEAT EXCHANGERS

.50 square feet to 46.50 square feet of exchange area standard, up to 116 square feet available.

All wetted parts fluoropolymer construction.

For heating and cooling deionized water and most acid and alkaline aqueous solutions. Inert to acids, anodizing and pickling solutions up to temperatures listed.

Non-conductive; eliminates stray currents in tank.

Flat and spiral configurations available.

Features:

In-line models available for external heating/cooling applications.

Integral inlet and outlet manifolds for single point connections.

Three optional inlet/outlet positions to simplify new and existing installations.

FEP (Fluorinated Ethylene Propylene) standard, maximum pressure (steam) 30 p.s.i.

PFA (Perfluoroalkoxy Resin) available, maximum pressure (steam) 60 p.s.i.

Compact, low profile design with integral perforated guard (1/8 inches thick fluoropolymer).

Heavy wall 1/2 inches or 1/4 inches diameter tubing improves circulation and reduces pressure drop.

Optional anti-floatation brackets available.

"L" shaped configurations available for bottom exchange applications.

Specific product information

For more information on this, or any other Process Technology product, please contact our offices (toll free within the United States or Canada) for the distributor nearest you, or visit our contact page.

U.S./Canada: 800-621-1998
Worldwide: 440-974-1300

Hastelloy C^® is a registered trademark of Haynes International, Inc.

Wet Process Heating and Cooling Equipment

Heat Exchangers

U.S./Canada: 800-621-1998 Worldwide: 440-974-1300

U.S./Canada: 800-621-1998
Worldwide: 440-974-1300